Get Support

123-456-789-10

DANOPREN PR50





DANOPREN PR 50 is a rigid extruded polystyrene (XPS) foam board with tongue and groove edges at various thicknesses. Manufactured without CFC's, HCFC's or HFC's.Designation Code for CE Marking:XPS-EN13164-T1-CS(10\Y)200-WL(T)0,7-DS(70)

INTENDED USE

Thermal Insulation for Buildings (ThIB).
Cavity walls. Ventilated façades.

PRESENTATION VALUE UNIT
Length 260 cm
Width 60 cm
Total thickness 50 mm
m2 per package 12.48 m2
Product Code 482003 -
TECHNICAL DATA VALUE UNIT STANDARD
Thickness 50 mm EN 823
Thickness tolerance -2/+3 mm EN 823
Length 260 cm EN 822
Length tolerance ± 10 mm EN 822
Width 60 cm EN 822
Width Tolerance -8/+8 mm EN 822
Flatness 6 mm/m EN 825
Squareness 5 mm/m EN 824
Thermal Resistance 1.50 m2K/W EN 12667
Compression strength (2) >200 kPa EN 826
Long-term water absorption by total immersion 0.7 Vol.% EN 12087
Long-term water absorption by diffusion 3 Vol.% EN 12088
Water absorption by freeze-thaw cycling 1 Vol.% EN 12091
Water vapour diffusion resistance factor ( ) (4) 80 - EN 12086
Dimensional Stability 5 % EN 1604
Reaction to fire E Euroclase EN 13501-01
Coefficient of linear thermal expansion 0,07 mm/m·K -
Working temperature range (Celsius degrees) -50 / +75 oC -
Specific heat 1.450 J/kg·K -
Nominal density 32 kg/m3 EN 1602
Capillarity Null - -
Edge treatment Shiplap - -
Surface Skinned - -

(2) Short-term (instant) test method; value reached at yield point or 10% deformation, whatever it comes first.

(3) Creep: long-term deformation under constant loading

(4) For skinned products it depends on thickness: the higher the thickness, the lesser the m-value