Get Support
123-456-789-10
TWIGA INSUL PREFORMED PIPE SECTIONS
Customised, factory finished, designed for easy and rapid “snap-on” installation, Twiga Insul Preformed Pipe Sections are a one piece moulded insulation made from glass fibers bonded together with a high temperature resistant binder for pipe diameters from 20mm NB to 300mm NB. Twiga Insul Preformed Pipe Sections are available with and without factory laminated aluminium foil facings.
Twiga lnsul Pipe Sections and Lamella Mats are recommended for insulati and cold pipes in HVAC. These products also find wide variety of applications in process industries such as refineries, petrochemicals, thermal power plants, chemical and fertilizer plants and others. These products offer excellent thermal resistance and superior fire properties at a low installed cost.
-
Green building material: Low embodied energy, zero ozone depleting potential, Minimum VOC.
-
Fire safe: Non combustible, Does not emit toxic fumes.
-
Excellent thermal resistance at low cost (low thermal conductivity).
-
Low cost: Easy and fast to install.
-
Non corrosive to metal: No shot content / impurities.
-
Non hygroscopic.
-
Resistant to chemicals, oil, fungus, bacteria, rot, and vermin attack.
| Parameters | Twiga Insul Preformed Pipe Sections | Twiga lnsul Lamella Mat |
|---|---|---|
| Pipe Diameter | 20mm NB to 300 mm NB | Above 300 mm NB |
| Thickness | 25mm, 40mm, 50mm, 65mm, 75mm | 50 mm, 65mm, 75mm |
| Standard Length | 1200 mm | 900 mm |
| Temperature Range | -195°C to +230°C (can go up to 450°C with special binder) | |
| Fire Rating | Conform to Class ‘0’ (BS 476 Part 4, 5, 6 & 7) | |
| Standard Density | 80 Kg/m’ | |
-
Twiga lnsul Preformed Pipe Sections conform to IS 9842 and BS 3958: Part 4.
